Shopping Cart
Shopping cart is empty.

BF

BF

  • Tuner Series Ford Falcon BF 6 Cylinder Plug in Kit
    • Tuner Series Ford Falcon BF 6 Cylinder Plug in Kit
    • The Wolf TUNER SERIES STREET Adapter Kit helps you get the most out of your modified Ford BF 6 Cylinder & V8 Auto or Manual engine. You can have a turbo, supercharged, NOS or normally aspirated engine.

      The Wolf TUNER SERIES STREET Ford Falcon BF 6 Cylinder & V8 Auto or Manual Plug-In is designed to connect directly into the vehicle's original harness.
      It allows for removal of the airflow meter, & using the internal MAP sensor on the Wolf, can be tuned up to 30psi or higher, (45psi can be requested). The adaptor uses all the standard sensors fitted to this vehicle.
      All the gauges and lights on the dashboard remain functional and do not require modification, however, the OD switch will need to be modified and an instruction sheet for this will be supplied on purchase.
      Requires a triple channel igniter for the ignition system; we can supply the appropriate igniter, In some cases the end user may want to upgrade there ignition system to a higher output, we have left this so that the customer can decide on this.
      This harness will allow for factory tuning of the injectors, which means on this model they are wired as batch fire injection (two banks of four injectors). Considering this, it may restrict the use of very large injectors, but if wiring is not a problem sequential injection can be achieved.
      This adaptor is set up as per factory specification and will fire the ignition as single pulse, one coil and distributor.
      Adjustable Dwell: allows the ignition system to be tuned to its maximum potential under different driving situations.
      The access of the MCO's allows for full control of the automatic transmission, which includes shift points to be changed to suit the modifications performed on the vehicle.
      Line pressure and torque convertor can also be set to the desired driving style, soft shift under light throttle and hard shift under hard acceleration.
      The TUNER SERIES STREET allows for the setup of launch control and anti lag, which can be done for maximum boost before launching into a race.
      Some other functions of the secondary map are 'valet mode', which allows a determined rev limit and tune to be entered. So at the flick of a switch (or turn of a key) this function, limits the power from the engine and stops people giving the vehicle a hard time with out your knowledge.
      Tune ability of 16 load points every 125 rpm both fuel and ignition, makes Wolf TUNER SERIES STREET Ford Falcon BF 6 Cylinder & V8 Auto or Manual Plug-In very versatile.
      12 parameters working just on cold start there is no reason why your vehicles will not turn key & start even if you have big injectors after correct tuning has been achieved.

      With this kit a small amount of wire cutting and crimping is required to connect the power, ground, TPS, Air Temp, Engine Temp, Injector and Ignition wires to the predetermined Wolf TUNER SERIES STREET harness.

      The kit contains:

      1 x Ford (Australia) BF 6 Cylinder / V8 Auto or Manual Terminated Adapter
      1 x Wolf TUNER SERIES STREET ECU
      1 x PC Software Disks
      1 x Communications Cable
      1 x Warranty Card
      2 x Wolf TUNER SERIES STREET Labels

      2 x 3 Channel Coil Igniter 320-000-003.

    • Read More

Login to Wolf EMS

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×