Wolf EMS

Software ECU

• 

  • V4X Plug In Kit

  • $1,318.18
  • The Wolf V4X is a very cost effective, light-weight and compact engine management system.
    On board 30PSi map sensor (can be upgraded to 45PSi), dedicated boost control.
    3D map tuning every 125 RPM and 16 load points makes this one of the most tunable low cost sytems around.
    The V4X can use most OEM sensors so there is no need to buy extra sensors and has the abialty to have different sensor configuration tables applied.
    With 4 ignition and 4 injection outputs running as true sequential on a 4 cylinder and semi sequental on bigger engines is not a problem.
    With the abilaty to be able to control upto 6 wire idle speed devices and the software to work with it, when using the Wolf V4X there is no reason your project Should no idle as per factory.
    2 x Low side drivers and 4 x high side drivers these can take care of auxilarys such as NOS, VVT and water injection.
    Dedicated Thermo fan output sets up for relable engine temp control.
    Dedicated Low side / high side fuel pump pin with fuel cut off programed in for safty.
    
    

    Inputs

    
    Engine Speed
    Engine Temperature
    Air Temperature
    Throttle Position
    Internal MAP Sensor (Rated to 30 PSI)
    
    

    Outputs

    
    4 Injector Drivers - (Minimum Injector Impedance 0.8 Ohms per output)
    4 Ignition Outputs
    Fuel Pump Control
    Boost Control
    Stepper Motor Idle Speed Control
    PWM Idle Speed Control
    2 Switched Low Side Auxiliary Outputs
    4 Switched High Side / Low Side Auxiliary Outputs
    

    Features

    
    
    1 x Wolf V4X ECU
    1 x Wolf V4X Plug and Play Loom
    1 x Wolf V4X Input Trigger Loom
    1 x PC Software USB
    1 x PC Serial Cable
    
    
    
  • Read More
• 

  • V4X Wire In Kit

  • $1,227.27

  • The Wolf V4X is a very cost effective, light-weight and compact engine management system.

    Inputs:
    Engine Speed
    Vehicle Speed
    Engine Temperature
    Air Temperature
    Throttle Position
    Internal MAP Sensor (Rated to 30 PSI)

    Outputs:
    4 Injector Drivers - (Minimum Injector Impedance 0.8 Ohms per output)
    4 Ignition Outputs
    Fuel Pump Control
    Boost Control
    Stepper Motor Idle Speed Control
    PWM Idle Speed Control
    2 Switched Low Side Auxiliary Outputs
    4 Switched High Side / Low Side Auxiliary Outputs

    Case Size: 118mm x 111mm x 31mm
    ECU Weight: 350g

    
    The kit contains:
    1 x Wolf V4X ECU
    1 x Wolf V4X Main Loom
    1 x Wolf V4X Input Trigger Loom
    1 x PC Software CD
    1 x PC Serial Cable
    2 x Wolf Sticker

  • Read More