Shopping Cart
Shopping cart is empty.

Wolf V4X Wire-In Kit

V4X Plug In Kit
V4X Plug In Kit
  • Price: $1,318.18 
  • In stock: N/A 
  • Qty:

Wolf V4X Wire-In Kit

V4X Plug In Kit

The Wolf V4X is a very cost effective, light-weight and compact engine management system.

This unit is designed to be wired in to your project to allow tuning of your motor.

The V4x has the abilaty to control 4 injector and ignition outputs sequentaly.
With 16 load cells X 125 rpm makes the Wolf V4X very tunable for all types of fuel.
Full control of idle devices such as 2, 4 or 6 wire.

Working with OEM sensors such as coolant and air temperatures, there is no need to purchase other sensors.

Onboard dedicated boost control.
Onboard 30 PSi map sensor (can be upgraded to 45 PSi map sensor).
6 X Auxilary output, 2 x lowside , 4 x high/low side.
Dedicated thermo fan driver.
Dedicated fuel pump driver.

$1,499.99
US

Inputs

  • Engine Speed
  • Vehicle Speed
  • Engine Temperature
  • Air Temperature
  • Throttle Position
  • Internal MAP Sensor (Rated to 30 PSI)

Outputs

  • 4 Injector Drivers - (Minimum Injector Impedance 0.8 Ohms per output)
  • 4 Ignition Outputs
  • Fuel Pump Control
  • Boost Control
  • Stepper Motor Idle Speed Control
  • PWM Idle Speed Control
  • 2 Switched Low Side Auxiliary Outputs
  • 4 Switched High Side / Low Side Auxiliary Outputs

Kit Contents

  • 1 x Wolf V4X ECU
  • 1 x Wolf V4X Plug and Play Loom
  • 1 x PC Software USB
  • 1 x PC Serial Cable
  • Sensors

    • As the Wolf ECU can work with most OEM sensors, the need to purchase sensors is not required
    • In the case of a retro fit where sensors are required, Wolf have in stock a full range of sensors to help with your project

    Additional Units

    Products below as an additional units, you can purchase separately.

    Dashboard

    The Wolf ECU interfaces with Racepak Dashes View all data from the Wolf such as

    • Water temperature
    • RPM
    • Boost
    • Speed KMH / MPH
    • Airtemp
    • TPOS
    • 7 of the Auxiliary inputs into the Wolf ECU

    Exhaust Gas Temperature Module

    • Step your tune up by measuring EGT’s
    • This unit will convert any “K” type thermocouple to a 0-5v output
    • Catalog or use this information with your Wolf ECU
    • Stop engine damage before it happens by adjusting the tune on your Wolf when EGT’s get too HOT!!!

    Stand Alone Data Logging

    • 16 channels analog and digital
    • 4 digital (wheel speed inputs)
    • Programmable interface
    • Name and graph your input sensors
    • Suspension sensors can be zeroed in software
    • 200hz data logging
    • GPS map tracing
    • Data files stored on Micro SD
    • Software allows for old data to be compared with new data
    • Graph overlay

Login to Wolf EMS

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×